cysight.ai • Configure NetFlow/sFlow - Vyatta

Page 1 of 1

Configure NetFlow/sFlow - Vyatta

Posted: Sun Jun 20, 2010 4:56 pm

by digitoll

https://www.vyatta.com/downloads/vc6-al ... -notes.pdf

Configuration

system {
- accounting {
  - interface <ifname> { # multi-value
    - sampling-rate <u32> # sample 1 in N packets, default
    }
  - syslog-facility facility
    netflow {
    - version <1|5|9> # default 5
      engine-id <u32> # 0-255
      server <ipv4> { # CySight Collector IP multi-value
      - port <u32> # Set to 2055 for easy CySight setup.
      }
    - timeout {
      - expiry-interval <u32> # default 60
        flow-generic <u32> # default 3600
        icmp <u32> # default 300
        max-active-life <u32> # default 604800
        tcp-fin <u32> # default 300
        tcp-generic <u32> # default 3600
        tcp-rst <u32> # default 120
        udp <u32> # default 300
      }
    }
  - sflow {
    - agentid <u32>
      server <ipv4> { # CySight Collector IP. multi-value
      - port <u32> # default 6343. Set to 6343 for easy CySight setup.
      }
    }
  }